Skip to main content




It is not recommended to store passwords/seeds on host's environment variables or in the source code in a production setup! Please make sure you follow our backup and security recommendations for production use!

Connecting to node(s)#

All features of library are accessible via an instance of Client class that provides high-level abstraction to all interactions over IOTA network (Tangle). This class has to be instantiated before starting any interactions with the library, or more precisely with IOTA nodes that power IOTA network.

The library is designed to automatically choose a starting IOTA node based on the network type one would like to participate in: testnet or mainnet. So very simplistic example how to connect to IOTA testnet is the following one:

import iota_client
# client will connect to testnet by defaultclient = iota_client.Client()print(client.get_info())

Output example of get_info() function of the Client instance:

{   "nodeinfo":{      "name":"HORNET",      "version":"0.6.0-alpha",      "is_healthy":true,      "network_id":"testnet7",      "bech32_hrp":"atoi",      "min_pow_score":4000.0,      "messages_per_second":27.3,      "referenced_messages_per_second":34.5,      "referenced_rate":126.37362637362637,      "latest_milestone_timestamp":1618133322,      "latest_milestone_index":33602,      "confirmed_milestone_index":33602,      "pruning_index":16086,      "features":[         "PoW"      ]   },   "url":""}

The most important properties:

  • is_healthy: indicates whether the given node is in sync with the network and so it is safe to use it. Even if a node is up and running it may not be fully prepared to process your API calls properly. The node should be "synced", meaning should be aware of all TXs in the Tangle. It is better to avoid not fully synced nodes. A node healthiness can be alternatively obtained also with a method Client.get_health()
  • bech32_hrp: it indicates whether the given node is a part of testnet (atoi) or mainnet (iota). See more info regarding IOTA address format

Please note, when using node load balancers then mentioned health check may be quite useless since follow-up API calls may be served by different node behind the load balancer that may have not been actually checked. One should be aware of this fact and trust the given load balancer participates only with nodes that are in healthy state. library additionally supports a management of internal node pool and so load-balancer-like behavior can be mimicked using this feature locally.

Needless to say, the Client class constructor provides several parameters via which the process can be closely managed.

The most common ones:

  • network: can be Testnet or Mainnet. It instructs the library whether to automatically select testnet nodes or mainnet nodes
  • node: specify address of actual running IOTA node that should be used to communicate with (in format https://node:port), for ex:
  • node_pool_urls: library also supports a management of a pool of nodes. You can provide a list of nodes and library manages access to them automatically (selecting them based on their sync status)
  • local_pow: local_pow==True (by default) means a Proof-of-work is done locally and not remotely
  • node_sync_disabled: node_sync_disabled==False (by default) means that library checks for sync status of node(s) periodically before its use. node_sync_disabled==True means library also uses nodes that are not in sync with network. This parameter is usually useful if one would like to interact with local test node that is not fully synced. This parameter should not be used in production

If node_pool_urls is provided then the library periodically checks in some interval (argument node_sync_interval) whether node is in sync or not.

Generating seed and addresses#

Since the IOTA network is permission-less type of network, anybody is able to use it and interact with it. No central authority is required at any stage. So anybody is able to generate own seed and then deterministically generate respective private keys/addresses.


Please note, it is highly recommended to NOT use online seed generators at all. The seed is the only key to the given addresses. Anyone who owns the seed owns also all funds related to respective IOTA addresses (all of them).


We strongly recommend to use official library together with enclave for value-based transfers. This combination incorporates the best security practices while dealing with seeds, related addresses and UTXO. See more information on Chrysalis docs.

IOTA uses Ed25519 signature scheme and address is usually represented by Bech32 (checksummed base32) format string of 64 characters.

A root of Ed25519 signature scheme is basically a 32-byte (256-bit) uniformly randomly generated seed based on which all private keys and corresponding addresses are generated. In the examples below, the seed is represented by a string of 64 characters using [0-9a-f] alphabet (32 bytes encoded in hexadecimal).

Seed can be for example generated using SHA256 algorithm on some random input generated by cryptographically secure pseudo-random generator, such as os.urandom():

import osimport hashlib
rnd_seed = hashlib.sha256(os.urandom(256)).hexdigest()print(rnd_seed)

In modern wallet implementations, such as our library and firefly wallet, the seed is usually generated from a seed mnemonic (seed phrase), using BIP39 standard, to be better memorized/stored by humans. It is based on randomly generated list of english words and later used to generate the seed. Either way, the seed is a root for all generated private keys and addresses

Address/key space#

Before an actual address generation process, let's quickly focus on BIP32 standard that describes an approach to Hierarchical Deterministic Wallets. The standard was improved by BIP44 lately.

These standards define a tree structure as a base for address and key space generation which is represented by a derivation path:

m / purpose / coin_type / account / change / address_index
  • m: a master node (seed)
  • purpose: constant which is {44}
  • coin_type: a constant set for each crypto currency. IOTA = 4218, for instance.
  • account: account index. Zero-based increasing int. This level splits the address/key space into independent branches (ex. user identities) which each has own set of addresses/keys
  • change: change index which is {0, 1}, also known as wallet chain.

There are two independent chain of addresses/keys. 0 is reserved for public addresses (for coin receival) and 1 is reserved for internal (also known as change) addresses to which transaction change is returned. IOTA is totally fine with address reuse, and so it is, technically speaking, totally valid to return transaction change to the same originating address. So it is up to developers whether to leverage it or not. library and its sibling help with either scenario

  • address_index: address index. Zero-based increasing int that indicates an address index

As outlined, there is a quite large address/key space that is secured by a single unique seed.

And there are few additional interesting notes:

  • Each level defines a completely different subtree (subspace) of addresses/keys and those are never mixed up

  • The hierarchy is ready to "absorb" addresses/keys for many different coins at the same time (coin_type), and all those coins are secured by the same seed.

    (So basically any BIP32/44-compliant wallet is potentially able to manage any BIP32/44-compliant coin(s))

  • There may be also other purposes in the future however let's consider a single purpose as of now. The constant 44 stands for BIP44

  • The standard was agreed upon different crypto communities, although not all derivation path components are always in active use. For example, account is not always actively leveraged across crypto space (if this is a case then there is usually account=0 used)

  • Using different accounts may be useful to split addresses/key into some independent spaces and it is up to developers to implement.


Please note, it may have a negative impact on a performance while account discovery phase. So if you are after using many multiple accounts then you may be interested in our stateful library that incorporates all business logic needed to efficiently manage independent accounts. Also our exchange guide provides some useful tips how different accounts may be leveraged


So in case of IOTA, the derivation path of address/key space is [seed]/44/4218/{int}/{0,1}/{int}. The levels purpose and coin_type are given, the rest levels are up to developers to integrate.

Generating address(es)#

IOTA addresses are generated via Client.get_addresses() function that returns a list of tuples with generated addresses. Considering the previous chapter about individual address/key spaces, it becomes quite clear what all used input function arguments are for.

Please note: for the examples outlined below, an example seed b3d7092195c36d47133ff786d4b0a1ef2ee6a0052f6e87b6dc337935c70c531e was used via environment variable called IOTA_SEED_SECRET. This seed serves for training purposes only.

The whole process is deterministic which means the output is the same as long as the seed is the same:

import osimport iota_client
# Get the seed from environment variableIOTA_SEED_SECRET = os.getenv('IOTA_SEED_SECRET')if not IOTA_SEED_SECRET:    raise Exception("Please define environment variable called `IOTA_SEED_SECRET`")
client = iota_client.Client()
address_changed_list = client.get_addresses(    seed=IOTA_SEED_SECRET,    account_index=0,    input_range_begin=0,    input_range_end=10,    get_all=True)print(address_changed_list)

Output example:

[('atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86', False), ('atoi1qzfvkkp398v7hhvu89fu88hxctf7snwc9sf3a3nd7msfv77jk7qk2ah07s3', True), ('atoi1qq4t98j5y8wxkaujue99mjwqcp6jvvmsd5lv0755sz7dtjdz3p2lydv76sy', False), ('atoi1qrhzhjxc4z8vpwjt3hafs5xpdng5katqe890p0h95mc0l273j8yzxn7r4hc', True), ('atoi1qputu0yvfvxd7g39wf4rc67e0f0dyhl6enxu9jxnsrjqmemh067tw7qelyc', False), ('atoi1qptg5w2x47qwjf3gpqt3h7d2ey5x7xf8v7qtt29gkxt4mjfjfc28sutvd8a', True), ('atoi1qprvelq9paakh72fgm6j2kf8kexadw3t5xljer9dpsep5c7wx5mjwdxch6z', False), ('atoi1qrwk37tz47ddng9kpxfflkpz5tplcq7ll56v4acam04307xk70l7uf6wg8j', True), ('atoi1qper3zr5xe9x0wqs35ytwh622870g44frkyygdhs0ds8yejle3xujhq7dx3', False), ('atoi1qq6lkr9hucfylqjaqphu0stvk8pcmsx98r7ukuq40asszwmqytlnc058thk', True), ('atoi1qzpn7se3ryhscmqg404pycxzvfpt8v4xn8aul0tqdh00xsncgnxu7na7zjj', False), ('atoi1qz4qqakty9qytw8fk9shelt9lwlvv83s5ggt3wjag9fkgcc74z78w4l86y5', True), ('atoi1qp20uddchglqry0l5qnjg5aln8d5rk2v5l45hwrxv9z0daxs7u6xcsh4077', False), ('atoi1qrlqm2u5txxxnjx22fxq0jfjzk6l4nwnue6ht5pepk65m2f4xmxqynmxu2m', True), ('atoi1qqydc70mpjdvl8l2wyseaseqwzhmedzzxrn4l9g2c8wdcsmhldz0ulwjxpz', False), ('atoi1qrkjennxyl2xcqem6x69ya65sasma33z0ux872k846lqft0s3qf7k6lqpft', True), ('atoi1qr4yuekp30ff7mnnnjwy9tdhynxmlmkpuxf70qurtwudp2zpf3jeyw4uh37', False), ('atoi1qp6m5sz5ayjtccfxapdk5lp4qkheyfg0emzntmulyxzftps730vcul8dmqr', True), ('atoi1qzrwhkzhu67fqltfffwljejawdcghedukpgu9x6tzevwlnq89gmfjtayhgz', False), ('atoi1qpehxcp24z947dgupjqc9ktkn5ylmdxqqnx83m7xlajnf8005756u4n7z77', True)]
  • Each tuple contains address and bool value indicating the given address is a change address or not.

    True means the given address is a change address (internal). So basically we've got two independent sets of addresses (10 items per each)

  • This behavior is controlled via get_all argument. get_all=False (default) means to generate only public addresses

IOTA address is represented by a checksumed base 32 string (Bech32) and you can see a detailed explanation on Chrysalis docs. Just a recap:

  • If an address starts with atoi then it means it is related to testnet. iota stands for mainnet
  • Number 1 at 5th position is just a separator
  • The last 6 characters are reserved for a checksum

Address can be also represented in a hex format and luckily provides some convenience functions to convert addresses respectively: Client.bech32_to_hex() and Client.hex_to_bech32().

To quickly validate any IOTA address, there is a convenience function Client.is_address_valid() that returns bool value. Needless to say, performing a sanity check of an address before its use is an advisable practice.

Checking a balance#

In IOTA testnet, there is a faucet service that provides test tokens to any testnet address:

There are three common api calls that can be leveraged:

  • Client.get_address_balance(address: str): it expects a single address in Bech32 format and returns dict with a balance for the address
  • Client.get_address_balances(list[str]): a convenience function that expects list of addresses in Bech32 format and returns list of dict with balances for all given addresses
  • Client.get_balance(seed, account_index (optional), initial_address_index(optional), gap_limit(optional)): a convenience function that combines Client.get_addresses() and Client.get_address_balances() api calls. It returns a combined balance for the provided seed and its wallet account index
import osimport iota_client
# Get the seed from environment variableIOTA_SEED_SECRET = os.getenv('IOTA_SEED_SECRET')if not IOTA_SEED_SECRET:    raise Exception("Please define environment variable called `IOTA_SEED_SECRET`")
client = iota_client.Client()
print("Return a balance for a single address:")print(    client.get_address_balance("atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86"))
print("Return a balance for the given seed and account_index:")print(    client.get_balance(        seed=IOTA_SEED_SECRET,        account_index=0,        initial_address_index=0    ))

Example of output:

Return balance for a single address:{   "address_type": 0,   "address":"atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86",   "balance":9000000,   "dust_allowed":false}
Return balance for the given seed and account_index:21000000
  • address_type indicates type of address. Value 0 denotes a Ed25519 address (currently the default for IOTA)
  • dust_allowed indicates whether the given address is allowed to accepts a dust due to dust protection mechanism

Client.get_balance() performs a several tasks under the hood. It starts generating addresses for the provided seed and account_index from initial_address_index, and checks for a balance of each of the generated addresses. Since it does not know how many addresses are used in fact, there is a condition set by gap_limit argument when to stop searching. If gap_limit amount of addresses in a row have no balance the function returns result and searching does not continue.

Messages, payload and transactions#

Before we continue, let's introduce some additional terms that describe a unit that is actually broadcasted in IOTA network. IOTA is based on a concept of messages and payloads.

Message is a data structure that is actually being broadcasted in IOTA network and represent a node (vertex) in the Tangle graph. It can refer to up to 8 previous messages and once a message was attached to the Tangle and approved by a milestone, the Tangle structure ensures the content of the message is unaltered. Every message is referenced by message_id which is based on a hash algorithm of binary content of the message. Message is an atomic unit that is confirmed by network as a whole.

Message is broadcasted using a binary format, is arbitrary size (up to 35 kB) and it can hold a variable sets of information so called payloads. Number of payloads a single message can encapsulate is not given (even a message without any payload at all is completely valid).

Payload represents a layer of concern. Some payloads may change a state of the ledger (ex. transactions) and some may provide extra features to some specific applications and business use cases (ex. indexed data).

There are already implemented core payloads, such as SignedTransaction, MilestonePayload and IndexationPayload but the message and payload definition is generic enough to incorporate any future payload(s) the community agrees upon.

Needless to say, IOTA network ensures the outer structure of message itself is valid and definitely aligned with a network consensus protocol, however the inner structure is very flexible, future-proof, and offer an unmatched network extensibility.


The current IOTA network incorporates the following core payloads:

  • SignedTransaction: payload that describes UTXO transactions that are cornerstone of value-based transfers in IOTA network. Via this payload, message can be also cryptographically signed
  • MilestonePayload: payload that is emitted by Coordinator
  • IndexationPayload: payload that enables addition of an index to the encapsulating message, as well as some arbitrary data. The given index can be later used to search the message(s)

Unspent Transaction Output (UTXO)#

IOTA uses unspent transaction output model, so called UTXO. It is based on an idea to track unspent amount of tokens via data structure called output.

Simplified analogy:

  • There is 100 tokens recorded in the ledger as Output A and this output belongs to Alice. So initial state of ledger: Output A = 100 tokens
  • Alice sends 20 tokens to Paul, 30 tokens to Linda and keeps 50 tokens at her disposal
  • Her 100 tokens are recorded as Output A and so she has to divide (spent) tokens and create three new outputs: Output B with 20 tokens that goes to Paul, Output C with 30 tokens that goes to Linda and finally Output D with the rest 50 tokens that she keep for herself
  • Original Output A was completely spent and can't be used any more. It has been spent and so becomes irrelevant to ledger state
  • New state of ledger: Output B = 20 tokens, Output C = 30 tokens and Output D = 50 tokens
  • Total supply remains the same. Just number of outputs differs and some outputs were replaced by other outputs in the process


The key takeaway of the outlined process is the fact that each unique output can be spent only once. Once the given output is spent, can't be used any more and is irrelevant in regards to the ledger state.

So even if Alice still wants to keep remaining tokens at her fingertips, those tokens have to be moved to completely new output that can be for instance still tight to the same Alice's iota address as before.

Every output stores also information about an IOTA address to which it is coupled with. So addresses and tokens are indirectly coupled via outputs. So basically sum of outputs and their amounts under the given address is a balance of the given address, ie. the number of tokens the given address can spend. And sum of all unspent outputs and theirs amounts is equal to the total supply.

Before the chapter is wrapped up, one thing was left unexplained: "how outputs are being sent and broadcasted to network?" Outputs are being sent encapsulated in a message as a part of SignedTransaction payload.


There are three functions to get UTXO outputs (related to the given address):

  • Client.get_address_outputs(str): it expects address in Bech32 format and returns list[dict] of transaction_ids and respective indexes
  • Client.get_output(str): it expects output_id and returns the UTXO output associated with it
  • Client.find_outputs(output_ids (optional), addresses (optional)): it is a bit more general and it searches for UTXO outputs associated with the given output_ids and/or addresses

Client.get_address_outputs(str) returns transaction_ids and indexes in a raw form (in bytes) defined on protocol level and so usually some quick conversion is needed:

import iota_clientclient = iota_client.Client()
outputs = client.get_address_outputs("atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86")for output in outputs:    print(f"Output index: {output['index']}; raw transaction id: {output['transaction_id']}")    encoded_hex = "".join(f"{i:0>2x}" for i in output["transaction_id"] + list(int(output["index"]).to_bytes(2, 'little')))    print(f"`output_id` encoded in hex: {encoded_hex}")

Output example:

Output index: 0; raw transaction id: [162, 44, 186, 6, 103, 201, 34, 203, 177, 248, 189, 202, 249, 112, 178, 168, 129, 204, 214, 232, 142, 47, 204, 229, 3, 116, 222, 42, 172, 124, 55, 114]`output_id` encoded in hex: a22cba0667c922cbb1f8bdcaf970b2a881ccd6e88e2fcce50374de2aac7c37720000
  • as a result, UTXO output is represented by output index and transaction_id. transaction_id is basically a list of 32 bytes. index is 2-bytes (16bits) uint
  • index and transaction_id is usually combined into single hex string of 68 characters = 32 * 2 chars (transaction_id; 32 bytes in hex) + 4 chars (index; 2 bytes in hex).

The resulting output_id is the unique id of the given output

Then the function Client.get_output(str) can be used to get details about the given output_id:

import iota_clientclient = iota_client.Client()
print(    client.get_output("a22cba0667c922cbb1f8bdcaf970b2a881ccd6e88e2fcce50374de2aac7c37720000"))

Output example:

{   "message_id":"f51fb2839e0a24d5b4a97f1f5721fdac0f1eeafd77645968927f7c2f4b46565b",   "transaction_id":"a22cba0667c922cbb1f8bdcaf970b2a881ccd6e88e2fcce50374de2aac7c3772",   "output_index":0,   "is_spent":false,   "output":{      "treasury":"None",      "signature_locked_single":{         "kind":0,         "address":{            "ed25519":{               "kind":0,               "address":"atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86"            }         },         "amount":10000000      },      "signature_locked_dust_allowance":"None"   }}

A function Client.find_outputs() is a convenient shortcut combining both mentioned methods in a single call:

import iota_clientclient = iota_client.Client()
  • it supports two arguments, a list of output_ids or a list of addresses

Output example:

[   {      "message_id":"7c47db1c4555348c260d91e90cc10fd66c2e73a84ec24bf9533e440f6d945d42",      "transaction_id":"c3f416b4394dd6e49354444d53e3c33f1169f25889ad7bc1c2ea83e35e291d5c",      "output_index":1,      "is_spent":false,      "output":{         "treasury":"None",         "signature_locked_single":{            "kind":0,            "address":{               "ed25519":{                  "kind":0,                  "address":"atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86"               }            },            "amount":9000000         },         "signature_locked_dust_allowance":"None"      }   }]
  • message_id: refer to the encapsulating message in which the transaction was sent
  • transaction_id, output_index: refer to the given output within the SignedTransaction payload. There may be several different outputs involved in a single transaction and so just transaction_id is not enough
  • output: this section provides details about the iota address to which the given unspent transaction output is coupled with
  • amount: state an amount of tokens related to the output
  • is_spent: of course, very important one indicating whether the given output is a part of the actual ledger state or not. As mentioned above, if an output was already spent, it is not part of ledger state any more and was replaced by some other output(s) in the process

So this is quite interesting part, notice the output_id that was used in a function call to get output details is the same as a combination of transaction_id and output index.

This way a transaction is tightly coupled with outputs since SignedTransaction payload is a main vehicle how outputs are being created and spent, and altogether everything is encapsulated in a message.


As mentioned above, the message is encapsulating data structure that is being actually broadcasted across network. It is an atomic unit that is accepted/rejected as a whole.

There is a convenient function Client.message() that prepares a message instance and sends it over a network. It accepts wide range of input parameters and can help with any kind of message type to be broadcasted.

The simplest message that can be broadcasted is a message without any particular payload:

import iota_clientclient = iota_client.Client()
message = client.message()print(message)

Output example:

{   "message_id":"e2daa4c6b012b615becd6c12189b2c9e701ba0d53b31a15425b21af5105fc086",   "network_id":7712883261355838377,   "parents":[      "0e2705ce50fec88f896663d4b7d562e74cbcfdd951ac482b1f03cfa5f27396d7",      "0f5a0b2041766127c3f3bff2dd653b450b72e364765fcc805a40423c59ed01f9",      "20635b30aee437575d7e6abdf6629eec80543bee30848b0abdda2200fc11a977",      "da97cd6cfcbb854b8fd3f064c8459c5c9eae80dbd5ef594a3e1a26dcb8fc078c"   ],   "payload":"None",   "nonce":2305843009213869242}
  • message_id is an unique id that refers to the given message in network
  • as mentioned above, every message in the Tangle should refer to up to 8 other messages, those are indicated in the section parents
  • no actual payload was given in this example message (payload=None)
  • nonce refer to a result of proof-of-work

Once a message is broadcasted, there are two main functions that can be used to read all information about the given message from the Tangle (Client.get_message_data() and Client.get_message_metadata()):

import iota_clientclient = iota_client.Client()
message = client.get_message_data("e2daa4c6b012b615becd6c12189b2c9e701ba0d53b31a15425b21af5105fc086")message_meta = client.get_message_metadata("e2daa4c6b012b615becd6c12189b2c9e701ba0d53b31a15425b21af5105fc086")
print("Message meta data:")print(message_meta)print("Message data:")print(message)

Output example:

Message meta data:{   "message_id":"e2daa4c6b012b615becd6c12189b2c9e701ba0d53b31a15425b21af5105fc086",   "parent_message_ids":[      "0e2705ce50fec88f896663d4b7d562e74cbcfdd951ac482b1f03cfa5f27396d7",      "0f5a0b2041766127c3f3bff2dd653b450b72e364765fcc805a40423c59ed01f9",      "20635b30aee437575d7e6abdf6629eec80543bee30848b0abdda2200fc11a977",      "da97cd6cfcbb854b8fd3f064c8459c5c9eae80dbd5ef594a3e1a26dcb8fc078c"   ],   "is_solid":true,   "referenced_by_milestone_index":284866,   "milestone_index":"None",   "ledger_inclusion_state":{      "state":"NoTransaction"   },   "conflict_reason":"None",   "should_promote":"None",   "should_reattach":"None"}
Message data:{   "message_id":"e2daa4c6b012b615becd6c12189b2c9e701ba0d53b31a15425b21af5105fc086",   "network_id":7712883261355838377,   "parents":[      "0e2705ce50fec88f896663d4b7d562e74cbcfdd951ac482b1f03cfa5f27396d7",      "0f5a0b2041766127c3f3bff2dd653b450b72e364765fcc805a40423c59ed01f9",      "20635b30aee437575d7e6abdf6629eec80543bee30848b0abdda2200fc11a977",      "da97cd6cfcbb854b8fd3f064c8459c5c9eae80dbd5ef594a3e1a26dcb8fc078c"   ],   "payload":"None",   "nonce":2305843009213869242}
  • Client.get_message_metadata provides information how the given message fits to network structures such as ledger_inclusion_state, etc.
  • Client.get_message_data provides all data that relates to the given message and its payload(s)


IndexationPayload is a payload type that can be used to attach an arbitrary data and key index to a message. At least index should be provided in order to send the given payload. Data part (as list[bytes]) is optional one:

import iota_clientclient = iota_client.Client()
# encoding utf string into list of bytessome_utf_data = "some utf based data".encode("utf8")
message = client.message(    index="some_data_index", data=some_utf_data)print(message)

Output example:

{   "message_id":"8d4fa37be3c00691131c2c3e03e7b8b956c9118a2ce4be3a8597d51d82ed2de9",   "network_id":7712883261355838377,   "parents":[      "3719d308ae14b7ef1ed5a3a1604228e97587b9da487db10bc6e4a4f800083da0",      "4431e2f776db888488728e0aa34c94975e65d6fa74893aa675172af6b9f37257",      "8f9fa84954c58bcfc9acc33ca827b4ea35c2caae88db736399a031120e85eebf",      "f63d416de97e6a9fd1314fbbbbb263f30dff260f3075f9a65e7dfe1f2cc56ce3"   ],   "payload":{      "transaction":"None",      "milestone":"None",      "indexation":[         {            "index":"736f6d655f646174615f696e646578",            "data":[               115,               111,               109,               101,               32,               117,               116,               102,               32,               98,               97,               115,               101,               100,               32,               100,               97,               116,               97            ]         }      ],      "receipt":"None",      "treasury_transaction":"None"   },   "nonce":6917529027641573188}
  • Feel free to check the given message using its message_id via Tangle explorer
  • In comparison to an empty message sent in the previous chapter, the payload section looks more interesting
  • There are three payloads prepared (transaction, milestone and indexation) however only indexation payload is leveraged this time
  • index was simply encoded to list[bytes] in hex (no hash algorithm) and the resulting string can be leveraged as an additional way how to search for a set of indexed messages with the same key index via Tangle explorer or Client.find_messages() API call
  • data contains an arbitrary data encoded in bytes
  • Please note there is no IOTA address involved while sending data messages. Such messages are referenced using message_id or key index
  • IOTA addresses are part of UTXO data structure that is sent using SignedTransaction payload explained below


SignedTransaction is a payload type that is used to transfer value-based messages as UTXO (Unspent Transaction Output).

As mentioned above, this core payload changes the ledger state as old outputs are being spent (replaced) and new outputs are being created:

import iota_clientclient = iota_client.Client()

Example of a message with SignedTransaction payload:

{   "message_id":"f51fb2839e0a24d5b4a97f1f5721fdac0f1eeafd77645968927f7c2f4b46565b",   "network_id":7712883261355838377,   "parents":[      "4a84bf1d345a441cfdefd0e71d6efe820c1077e5dda9122a09cbf026132d208c",      "6e9153884fd1983be4c27c3ccdc69760b4775484eea498ec0707c2ff8901995e",      "7ac1407c88007a54d603400b558d5110f2bbf93a68100fb34f0b40cece9d0868",      "9ac0fd457998a1b3ddab9c0014f41344475358ad36c64a4b763de3b51f47c09a"   ],   "payload":{      "transaction":[         {            "essence":{               "inputs":[                  {                     "transaction_id":"4a34274992474d91cf45366425ad1d4df6042cba64f3b6c07d297a2e6b7154a9",                     "index":0                  }               ],               "outputs":[                  {                     "address":"atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86",                     "amount":10000000                  },                  {                     "address":"atoi1qzdnav0zdgd4grn25cnwcuudtahvlhgh0r349ur749y9l03vadrfurhkxwj",                     "amount":100016136757200                  }               ],               "payload":{                  "transaction":"None",                  "milestone":"None",                  "indexation":[                     {                        "index":"54414e474c454b495420464155434554",                        "data":[                        ]                     }                  ],                  "receipt":"None",                  "treasury_transaction":"None"               }            },            "unlock_blocks":[               {                  "signature":{                     "public_key":[                        ...                     ],                     "signature":[                        ...                     ]                  },                  "reference":"None"               }            ]         }      ],      "milestone":"None",      "indexation":"None",      "receipt":"None",      "treasury_transaction":"None"   },   "nonce":1146102}

Each transaction includes the following set of information:

  • inputs: list of valid outputs that should be used to fund the given message. Those outputs will be spent and once the message is confirmed, those outputs are not valid anymore. Outputs are uniquely referenced via transaction_id and inner index. At least one output has to be given with enough balance to source all outputs of the given message
  • outputs: list of IOTA address(es) and related amount(s) the input outputs should be split among. Based on this information, new UTXO entities (outputs) are being created
  • unlock_blocks: it includes a transaction signature(s) (currently based on Ed25519 scheme) that proofs token ownership based on a valid seed. Needless to say, only valid seed owner is able to correctly sign the given transaction and proofs the ownership of tokens under the given output(s). Each input output has to have a corresponding unblock_block entry in case more outputs are used to fund the operation either using the given signature or as a reference to existing signature
  • payload: each SignedTransaction can include additional payload(s) such as IndexationPayload, etc. Meaning, any value-based messages can also contain arbitrary data and its key index. It is also an example how individual payloads can be encapsulated on different levels of concern

Sending value-based messages is also very straightforward process.

As a minimum, it needs a valid seed, output addresses and amount. The method finds valid output(s) that can be used to fund the given amount(s) and the unspent amount is sent to the same address:

import osimport iota_client
# Get the seed from environment variableIOTA_SEED_SECRET = os.getenv('IOTA_SEED_SECRET')if not IOTA_SEED_SECRET:    raise Exception("Please define environment variable called `IOTA_SEED_SECRET`")
client = iota_client.Client()
message = client.message(    seed=IOTA_SEED_SECRET,    outputs=[        {            'address': 'atoi1qqydc70mpjdvl8l2wyseaseqwzhmedzzxrn4l9g2c8wdcsmhldz0ulwjxpz',            'amount': 1_000_000        }    ])print(message)

Output example:

{   "message_id":"7c47db1c4555348c260d91e90cc10fd66c2e73a84ec24bf9533e440f6d945d42",   "network_id":7712883261355838377,   "parents":[      "0ec0cd3c0303845980981bf7cc72371a8cd6e38c15924a2950fb15c5ecf4a53b",      "4011f7724f96b6e39cdf9987ee650c0552d4fc63c09dd72b9be30a3cc7b53806",      "5730d5bd607c6125130df30204c995db5edcbd16c4ab150946dffac37ace26f9",      "8c1982682dbfa0abdd8772e38d044dbfcbea5ebb99bbe7174c07d81adda62419"   ],   "payload":{      "transaction":[         {            "essence":{               "inputs":[                  {                     "transaction_id":"a22cba0667c922cbb1f8bdcaf970b2a881ccd6e88e2fcce50374de2aac7c3772",                     "index":0                  }               ],               "outputs":[                  {                     "address":"atoi1qqydc70mpjdvl8l2wyseaseqwzhmedzzxrn4l9g2c8wdcsmhldz0ulwjxpz",                     "amount":1000000                  },                  {                     "address":"atoi1qp9427varyc05py79ajku89xarfgkj74tpel5egr9y7xu3wpfc4lkpx0l86",                     "amount":9000000                  }               ],               "payload":"None"            },            "unlock_blocks":[               {                  "signature":{                     "public_key":[                        "..."                     ],                     "signature":[                        "..."                     ]                  },                  "reference":"None"               }            ]         }      ],      "milestone":"None",      "indexation":"None",      "receipt":"None",      "treasury_transaction":"None"   },   "nonce":9223372036854802939}

We recommend to use official library together with enclave for value-based transfers. This combination incorporates the best security practices while dealing with seeds, related addresses and UTXO. See more information on Chrysalis docs.

Dust protection#

Please note, there is also implemented a dust protection mechanism in the network protocol to avoid malicious actors to spam network in order to decrease node performance while keeping track of unspent amount (UTXO):


"... microtransaction below 1Mi of IOTA tokens [can be sent] to another address if there is already at least 1Mi on that address" That's why we did send 1Mi in the given example to comply with the protection."